Search
Now showing items 1-10 of 89
Multiple Inflows Muskingum Routing Model
Publisher: American Society of Civil Engineers
Abstract: The Muskingum principle of flood routing is applicable to a single channel reach bounded by two measuring sections with no lateral inflow in the reach. The basic Muskingum model provides a forecasting form that may be used ...
Estimation of Shear Wave Velocity and Seismic Site Characterization for New Nuclear Power Plant Region, India
Publisher: ASCE
Abstract: This paper presents a new correlation between standard penetration test (SPT) N values and shear wave velocity (Vs) for a newly proposed nuclear power plant (NPP) region at Haryana state, India. The site location falls ...
Caissons in Cohesionless Soils Considering 3D Wedge under Earthquake Loading
Publisher: ASCE
Abstract: Ultimate soil resistance that acts on a seismically induced caisson foundation and its distribution along the caisson height have been formulated by considering passive wedge failure analysis for both dry and submerged ...
Evaluation of Passive Earth Resistance Using an Improved Limit Equilibrium Method of Slices
Publisher: ASCE
Abstract: The present study proposes a new approach to solve passive earth pressure problems using the method of slices, coupled with the limit equilibrium (LE) technique. Unlike existing LE studies that adopted failure surfaces of ...
Semianalytical Solution for Buried Pipeline Subjected to Horizontal Transverse Ground Deformation
Publisher: ASCE
Abstract: For buried pipelines, it is not always possible to avoid active zones where there is a possibility of ground deformation either due to earthquake or topographical reasons, and hence it is necessary to understand the impact ...
Vibration Response of Rolling Element Bearings in a Rotor Bearing System to a Local Defect Under Radial Load
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the present investigation, a theoretical model has been developed to obtain the vibration response due to a localized defect in various bearing elements in a rotor-bearing system under radial ...
Application of Lund’s Stability Analysis Program in Design of Modern Turbomachinery
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The analytical tool developed by Lund has aided in the design and manufacture of modern turbomachinery operating at relatively high speeds, under severe operating conditions, with high gas ...
A Theoretical Model to Predict Vibration Response of Rolling Bearings to Distributed Defects Under Radial Load
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An analytical model has been presented to predict the vibration response of rolling bearings due to distributed defects under radial load. For bearings without defect and with race defect, the ...
Note on the Thermoelastic Stress and Displacement in a Thin Rod of Finite Length Due to a Point Source of Heat Moving With a Constant Velocity Along the Rod
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper is concerned with the determination of thermoelastic stress and displacement in a thin rod of finite length due to a point source of heat moving with a constant velocity along the rod.
CSV
RIS