Search
Now showing items 1-7 of 7
Development of an Apparatus to Produce Fractures From Short-Duration High-Impulse Loading With an Application in the Lower Leg
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Axial loading of the lower leg during impact events can cause significant fractures of the tibia. The magnitude of lower leg axial loading that occurs during short-duration high-impulse events, ...
Estimation of Injury Limits at Vulnerable Impact Locations Along the Forearm Via THUMS AM50 Finite Element Model at Airbag Loading Rates
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Side and frontal airbag deployment represents the main injury mechanism to the upper extremity during automotive collisions. Previous dynamic injury limit research has been limited to testing the forearm at either the ...
Evaluation of an Elastomeric Honeycomb Bicycle Helmet Design to Mitigate Head Kinematics in Oblique Impacts
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Head impacts in bicycle accidents are typically oblique to the impact surface and transmit both normal and tangential forces to the head, causing linear and rotational head kinematics, respectively. Traditional expanded ...
Longitudinal Joints with Accelerated Construction Features in Decked Bulb-Tee Girder Bridges: Strut-and-Tie Model and Design Guidelines
Publisher: American Society of Civil Engineers
Abstract: This paper focuses on the development of a strut-and-tie model (STM) that can be used in the design of previously developed longitudinal joints with accelerated construction features. Four joint specimens reinforced with ...
A Force-Sensing Insole to Quantify Impact Loading to the Foot
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Lower leg injuries commonly occur in frontal automobile collisions, and are associated with high disability rates. Accurate methods to predict these injuries must be developed to facilitate the testing and improvement of ...
Quantification of Behind Shield Blunt Impacts Using a Modified Upper Extremity Anthropomorphic Test Device
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Ballistic shields are used by military and police members in dangerous situations to protect the user against threats such as gunfire. When struck, the shield material deforms to absorb the incoming kinetic energy of the ...
Development of a Testing Methodology to Quantify Bone Load Transfer Patterns for Multiple Stemmed Implants in a Single Bone With an Application in the Distal Ulna
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Optimal parameters for many orthopaedic implants, such as stem length and material, are unknown. Geometry and mechanical properties of bone can vary greatly amongst cadaveric specimens, requiring ...
CSV
RIS