Search
CSV
RISAn RFID Driven Graphical Formalized Deduction for Describing the Time Sensitive State and Position Changes of Work in Progress Material Flows in a Job Shop Floor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: As a key advanced manufacturing technology in next generation manufacturing systems, radio frequency identification (RFID) technology is considered to be one of the most promising technological innovations with the potential ...
Analysis of Damage Mechanisms and Evolution in Recycled Aggregate Concrete Considering the Effects of Water–Cement Ratio and Pore Water
Publisher: American Society of Civil Engineers
Abstract: AbstractTo study the effect of water–cement (w/c) ratio and pore water on the mesomechanical properties of recycled aggregate concrete
(RAC), a computational model of RAC that takes into account various w/c ratios (0.3, ...
Use of Viscoelastic Continuum Damage Theory to Correlate Fatigue Resistance of Asphalt Binders and Mixtures
Publisher: American Society of Civil Engineers
Abstract: The objectives of this study were to evaluate the fatigue resistance of asphalt binders in relation to their composition and establish the correlation of the fatigue property of asphalt binders with that of mixtures using ...
Optimization of Protection Device Parameters for Pump-Stopping Water Hammer Protection in Long-Distance Water Conveyance Pipelines Via Hybrid NSGA-II
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Abstract. Water hammer in long-distance pumped water transmission pipelines can cause severe safety incidents, making effective protection for pipelines and pump stations essential. However, optimizing parameters of water ...
Control of an Underactuated Three Link Passive–Active–Active Manipulator Based on Three Stages and Stability Analysis
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a novel threestage control strategy for the motion control of an underactuated threelink passive–active–active (PAA) manipulator. First, a nonlinear control law is designed to make the angle and ...
Three Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Different from conventional injection molding (CIM), injection/compression molding (ICM) evolves boundary variation in gapwise direction. In order to describe melt flow characteristics in ICM correctly, a new material ...
Fatigue Performance Prediction of Asphalt Pavement Based on Semicircular Bending Test at Intermediate Temperature
Publisher: American Society of Civil Engineers
Abstract: The objective of this study is to correlate asphalt mixtures’ crack resistance with their in situ cracking performance. Ten mixtures were obtained from a full-scale experiment at the Federal Highway Administration (FHWA) ...