Search
CSV
RISErratum: “Theoretical Stress Concentration Factors for Short Rectangular Plates With Centered Circular Holes” [ASME J. Mech. Des., 124, No. 1, pp. 126–128]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The insert formula in Fig. 2 should read σnom=Sw/w−a as indicated in Eq. (2) in the text.
Theoretical Stress Concentration Factors for Short Rectangular Plates With Centered Circular Holes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This work shows that the theoretical stress concentration factor depends on the length of the member in addition to the established other standard geometric parameters. In particular, the in-plane ...
Erratum: “Theoretical Stress Concentration Factors for Short Rectangular Plates With Centered Circular Holes” [ASME J. Mech. Des., 124, No. 1, pp. 126–128]
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: 1. Some of the labels in Fig. 1 are incomplete. They should read as follows: L/w=0.3, L/w=0.4, L/w=0.5, L/w=0.6 and L/w=0.7, L/w=0.8, L/w=0.9, L/w=1.0, L/w=1.1, L/w=1.2, L/w=1.4, L/w=2.5 and 5.
Geotechnical Aspects of Eroded Sediments Relevant to Tailings Disposal Design
Publisher: American Society of Civil Engineers
Abstract: Since 1975, Samarco Mineração S.A. has been mining the iron ore deposits of the Germano Mine in the Quadrilátero Ferr
GFRP Composite Culverts for Hydraulic and Agricultural Underpasses: Structural Behavior, Design, and Application
Publisher: ASCE
Abstract: Corrugated steel-sheet culvert systems were extensively applied in the construction of hydraulic and agricultural highways underpasses from the 1980s until the beginning of the 21st century. Less than 30 years after being ...