Search
Now showing items 1-10 of 115
Multi-Objective Operations of Multi-Wetland Ecosystem: iModel Applied to the Everglades Restoration
Publisher: American Society of Civil Engineers
Abstract: The Everglades is a complex, multiwetland ecosystem that is heavily managed to meet often-competing flood control, water supply, and environmental demands. Using objective measures to balance these demands through operational ...
In-Space Additive Manufacturing: A Review
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Manufacturing or repairing parts on-site, high geometric freedom, and feedstock efficiency have long been regarded as nascent capabilities of additive manufacturing (AM) technologies. Researchers aim to adopt these ...
Evaluation of Passive Cooling Systems for Residential Buildings in the Kingdom of Saudi Arabia
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, passive cooling strategies have been investigated to evaluate their effectiveness in reducing cooling thermal loads and air conditioning energy consumption for residential buildings in Kingdom of Saudi Arabia ...
Real-Time Estimation of Mean Remaining Life Using Sensor-Based Degradation Models
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Advances in sensor technology have led to an increased interest in using degradation-based sensory information to predict the remaining lives of partially degraded components and systems. This ...
Potential Use of Silica Fume Coupled with Slag in HVFA Concrete Exposed to Elevated Temperatures
Publisher: American Society of Civil Engineers
Abstract: In this study, cement was partially replaced with a Class-F fly ash (FA) at a level of 70% to produce high-volume fly ash (HVFA) concrete (F70). The F70 was modified by partially replacing the FA with an equal combination ...
A Review on Process Monitoring and Control in Metal Based Additive Manufacturing
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: There is consensus among both the research and industrial communities, and even the general public, that additive manufacturing (AM) processes capable of processing metallic materials are a set of game changing technologies ...
Cohesive and Adhesive Properties of Silicate Grout on Grouted-Sand Behavior
Publisher: American Society of Civil Engineers
Abstract: The role of grout cohesive and adhesive strengths on the mechanical properties of silicate-grouted sands was investigated. Ottawa 20-30 sand, lime aggregate, and sodium silicate grout with organic reagents were used in ...
Factors Affecting Mechanical and Creep Properties of Silicate-Grouted Sands
Publisher: American Society of Civil Engineers
Abstract: Factors affecting the strength, modulus, stress-strain, and time-to-failure relationships of moist-cured silicate-grouted sands were investigated from short-term and creep tests. Variables included in the short-term tests ...
Cyclic and Damping Properties of Silicate-Grouted Sand
Publisher: American Society of Civil Engineers
Abstract: Dynamic properties such as shear modulus, damping ratio, and fatigue strength of a sodium silicate-grouted sand were investigated using both destructive and nondestructive tests. Cyclic compression behavior of grouted sand ...
Cohesive and Adhesive Properties of Silicate Grout on Grouted-Sand Behavior
Publisher: American Society of Civil Engineers
CSV
RIS