Search
Now showing items 1-10 of 12
The Two-Degree-of-Freedom Tuned-Mass Damper for Suppression of Single-Mode Vibration Under Random and Harmonic Excitation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Whenever a tuned-mass damper is attached to a primary system, motion of the absorber body in more than one degree of freedom (DOF) relative to the primary system can be used to attenuate ...
Optimization of the Individual Stiffness and Damping Parameters in Multiple-Tuned-Mass-Damper Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The characteristics of multiple tuned-mass-dampers (MTMDs) attached to a single-degree-of-freedom primary system have been examined by many researchers. Several papers have included some parameter ...
The Dynamics of Lead-Screw Drives: Low-Order Modeling and Experiments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The closed-loop performance of a lead-screw drive is usually limited by a resonance in which the carriage oscillates in the direction of motion as the screw undergoes longitudinal and torsional ...
On Nonlinear Modes of Continuous Systems
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: We use several methods to study the nonlinear modes of one-dimensional continuous systems with cubic inertia and geometric nonlinearities. Invariant manifold and perturbation methods applied to ...
Energy Transfer From High-to Low-Frequency Modes in a Flexible Structure via Modulation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study of the response of axially-symmetric (i.e., circular cross-section) cantilever beams to planar external excitations is presented. Because of the axial symmetry, one-to-one ...
Nonlinear Normal Modes of a Continuous System With Quadratic Nonlinearities
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: We use two approaches to determine the nonlinear modes and natural frequencies of a simply supported Euler-Bernoulli beam resting on an elastic foundation with distributed quadratic and cubic ...
Assignment of Geometrical and Physical Parameters for the Confinement of Vibrations in Flexible Structures
Publisher: American Society of Civil Engineers
Abstract: A strategy for confinement of flexural vibrations in flexible structures by proper selection of their geometrical and physical parameters is proposed. We first show that the problem of vibration confinement can be formulated ...
Nonlinear Normal Modes of a Cantilever Beam
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Two approaches for determination of the nonlinear planar modes of a cantilever beam are compared. In the first approach, the governing partial-differential system is discretized using the linear ...
On Nonlinear Normal Modes of Systems With Internal Resonance
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A complex-variable invariant-manifold approach is used to construct the normal modes of weakly nonlinear discrete systems with cubic geometric nonlinearities and either a one-to-one or a three-to-one ...
Aerodynamic-Rotordynamic Interaction in Axial Compression Systems—Part I: Modeling and Analysis of Fluid-Induced Forces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a first principles-based model of the fluid-induced forces acting on the rotor of an axial compressor. These forces are primarily associated with the presence of a nonuniform ...
CSV
RIS