Search
ASME ( American Society of Mechanical Engineers )
Description: The American Society of Mechanical Engineers (ASME) is a professional association that, in its own words, "promotes the art, science, and practice of multidisciplinary engineering and allied sciences around the globe" via "continuing education, training and professional development, codes and standards, research, conferences and publications, government relations, and other forms of outreach." ASME is thus an engineering society, a standards organization, a research and development organization, a lobbying organization, a provider of training and education, and a nonprofit organization. Founded as an engineering society focused on mechanical engineering in North America, ASME is today multidisciplinary and global.
Now showing items 1-10 of 7431
Computer Design of a Vibration-Free Face-Milling Cutter
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A method is developed to choose the blade spacing for a face-milling cutter that will minimize vibration. When the dynamic frequency response of a machine-tool-workpiece system is known, a ...
Effect of Stiffness on Tool Wear and New Tool Life Equation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An investigation of the effect of stiffness of the machining system on tool life with different numbers of teeth in the cutter, cutting speeds, and feeds is described. A statistical analysis ...
Monte Carlo Simulation of the Machining Economics Problem
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A mathematical model of the machining operation is developed from experimental cutting data. The model considers two aspects of the machining process: tool wear and surface finish. The tool ...
A Load Calibration Technique for Use on Large Industrial Presses and Small Testing Machines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A load calibration technique based on the plastic deformation of a ring specimen is described. The method is applicable to any size press at loads up to full capacity. The method consists ...
Some Considerations on Tool-Life Scatter and Its Implications
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of tool-life scatter on the uncertainty of parameters of a typical tool-life model is analyzed using the joint confidence region approach. Some apparent contradictions concerning ...
Vibration of Cams Having Two Degrees of Freedom
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The vibration analysis of cam-follower systems is extended to models having two degrees of freedom. Two models are considered, one in which the cam support is rigid and the follower has two ...
Steady-State Thermal Stresses in Wedge-Shaped Cutting Tools
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Closed form expressions for the steady-state thermal stresses in a π/2 wedge, subject to constant-temperature heat sources on the rake and flank contact segments, are obtained from a conformal ...
Material Removal by High-Pressure Liquid Jets at Ten Kilobars
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: High-energy-density jets (0.75 × 106 hp/in.2 ) resulting from expanding liquid at extremely high pressures are capable of removing solid material from a wide variety of targets. Liquid jets ...
A Possible Mechanism for Causing Eccentricity in Sleeved Backup Rolls on Cold-Rolling Mills
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A theoretical analysis has shown that axial slipping of the sleeve on the roll arbor rather than plastic deformation of the roll necks may be the cause of backup-roll eccentricity on cold-rolling ...
Deflection of Spur Gear Teeth Cut in Thin Rims
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, the complex problem of deflection of loaded spur teeth cut in thin rims is studied. Tooth-deflection curves, modified for the effect of elasticity of the gear, and rim stiffness ...